Owners Manual

Issue 1 Page 9 of 13
BALANCED (XLR) INPUT
To use the XLR INPUT, connect XLR source outputs to the INPUT XLR sockets (see page 7). Make sure the
BALANCED/RCA switch is set for BALANCED.
BALANCED/RCA switch set to BALANCED
RIGHT
Speaker
+
-
LEFT
Speaker
+
-
LEFT XLR output
Pre-amplifier
RIGHT XLR out
p
ut
XLR signal leads connection diagram.
(Trigger and mains leads omitted for clarity).
Note: The two RED speaker terminals are internally connected together. Similarly, the two BLACK speaker
terminals are also internally connected together.
The diagram above shows the speakers connected to the left-hand output posts. It is also perfectly acceptable
to use the right-hand output posts as they are exactly the same connection internally.