Owners Manual

Issue 2
Page 12 of 13
Output (Balanced and single ended inputs)
Power 550W 8Ω load
Voltage 67Vrms 10Hz – 20KHz
190V peak to peak
Curren
t 200A peak
Damping factor 150
Output devices 3+3 pairs (bridged arrangement) per channel
RCA single ended XLR balanced
THD+N, 20Hz to 20 kHz <0.005% <0.004%
Signal / noise ratio >80dB ‘A’-weighted >86dB ‘A’-weighted
Input sensitivity for full output (vol. max) 450mV 450mV
Input impedance 25KΩ 50KΩ
Overload margin 20dB 26dB
Channel separation >80dB >86d
B
Frequency response +0, –1dB, 10Hz to 100 kHz
2 pairs
line level XLR (balanced) connectors
4 pairs line level RCA connectors
1 USB B 24 bit 192kHz
2 Coaxial 24 bit 192kHz
2 Optical 24 bit 96kHz
1 pair line level RCA fixed
1 pair pre-out RCA variable (volume controlled)
1 pair line level XLR variable (volume controlled)
1 Coaxial
1 Optical
1x 3.5mm mono jack accepts +/- 3 to 15V DC
1x 3.5mm mono jack socket gives +12V out when unit is on
115/230VAC
50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
2000 Watts
46 kg
(101 lbs)
48 kg (106 lbs)
485mm (19”)
Connections
Line inputs
Digital inputs
Line outputs
Digital outputs
Trigger In
Trigger Out
Power requirement
Mains voltag
es
Max Consumption
Weight
Unit only, unboxed
In shipping carton
Dimensions
Wide
High, including feet
185mm (7.2”)
Deep (front to back) including terminals 510mm (20”)
Standard accessories
IEC C19 type mains lead 16A
M8xi remote control
Batteries, LR03 or AAA, manganese alkaline type - 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
SPECIFICATIONS