TV Converter Box User Manual

SPECIFICATIONS
Musical Fidelity reserves the right to make improvements which may result in specification or
feature changes without notice.
Note : This product has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC rules, operation is subject to two conditions:
1 - This device may not cause harmful interference.
2 - This device must accept any interference received including interference that may cause
undesired operation.
These limits are designed to reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed in accordance with the instructions may cause harmful interference to radio
communications. However as there can be no guarantee that interference will not occur in a
particular installation we recommend that you take one or more of the following measures if
interference is experienced:
- Identify the source of interference, turn the X-24K off and on, does the interference persist?
- Re-orientate or relocate the receiving antenna.
- Increase the separation between the X-24K and receiver.
- Connect the X-24K and receiver to different mains outlet circuits.
- Consult your dealer or an experienced radio/TV technician.
WARNING - ANY MODIFICATIONS OR CHANGES TO THIS UNIT NOT EXPRESSLY
APPROVED BY MUSICAL FIDELITY WHO ARE THE PARTY RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THIS
EQUIPMENT.
Multistandard 24 Bit
Digital to Analog converter
INSTRUCTIONS FOR USE
DAC architecture 24 bit Delta-Sigma (Bitstream)
8x oversampling
Sampling frequencies 32kHz, 44.1kHz, 48kHz, 88.2kHz and 96kHz
Data types Supports 16, 18, 20 and 24 bit word length
Inputs Input 1: 75S/PDIF coaxial or TOSLINK optical
Input 2: 75 S/PDIF coaxial.
Outputs Left and Right analog audio
75 S/PDIF digital recording/loop out
Frequency response 10Hz - 20kHz + 0.2dB
S/N ratio > 96dB unweighted
> 105dB 'A' weighted
THD < 0.006% 10Hz - 20kHz unweighted
< 0.003% 10Hz - 20 kHz 'A' weighted
De-emphasis < + 0.1dB error, automatically selects correct
curve for 32kHz, 44.1kHz or 48kHz
Linearity < + 0.3dB to -100dB
Dimensions (approx.) 110 x 110 x 330mm (W x H x D)
Height and width include feet,
depth includes terminals

Summary of content (2 pages)