Hardware Manual

2 / 48
TESSERA TECHNOLOGY INC.
Change history
Version
Date
Description
1.00
2021/1/28
Initial version
1.01
2021/3/17
Changed P4, P7
1.02
2021/3/22
Power supply setting explanations are added
1.03
2021/6/11
Power line configuration diagram added
Signal wiring diagram added
Other material updates
1.04
2021/8/3
Comply with overseas certifications
Cautionary Notes:
・The contents of this document are subject to change without notice.
・Reproduction of this document in any format is prohibited without written permission from Tessera Technology Inc. (herein
“the Company”).
・This product was designed and fabricated for design engineers for the purpose of evaluation and becoming familiar with
product safety and reliability characteristics.
・The company shall not be liable for the infringement of third party patent, copyrights, or other intellectual property rights
arising from the use of Tessera Technology products in listed in this document. The company does not grant any rights
concerning Tessera Technology or third party patents, copyrights, or other intellectual property rights based on this material.
・Circuitry, software or related information included in this document is provided as semiconductor product operation examples
and application examples. The user is responsible for the appropriate application of the circuitry, software or related
information when designing equipment. The company shall not be liable for loss or damage incurred by the user or other third
party based on the use of this circuitry, software or related information.
・Please handle this product as you would a CMOS device. The user should be particularly careful to protect himself/herself from
accumulated static electricity when using this product.
・Make sure all test and measurement equipment, including the work station, are properly grounded.
・The user should wear an ESD wrist strap to prevent any buildup of static electricity.
・Do not touch connectors or device pins with bare hands