Hardware Manual

35 / 48
TESSERA TECHNOLOGY INC.
Figure 4-2 : SWD Mode Jumper Pin Switch Settings (Board)
The device must be able to transition to the On-Chip Debug (OCD) mode, but there are
some modes in which the device cannot directly transition to the OCD mode, such as
EXFPWON NORMAL, MINPWON NORMAL and VBB. In order to debug in EXFPWON,
NORMAL, MINPWON NORMAL or VBB, please make transition to OCD mode while
operating in ALLPWON NORMALL, and then transition to EXFPWON NORMAL, MINPWON
NORMAL or VBB. For more details, please refer to 2.7.2 "Limitation of emulator
connection" of RE01B group (product with 1.5M byte flash memory) User's Manual
Hardware Edition (R01UH0903).