Owner`s manual

!
6!
Align those slots over the pins and carefully insert the tube shields
over the three tubes. There are springs inside the top of the shields
therefore you will need to push down until you feel the shields hit
bottom, then twist them in a clockwise direction to lock the shields
onto the pins. Adjust the tubes and shields to stand up straight.
Placement of the preamp:
The Fosgate Signature phono stage should be placed close to the
turntable in order to use as short as possible phono cables between
the tonearm and the unit. Position the phono stage away from hum
producing sources such as motors, transformers and power cords.
Good ventilation is essential for safety and the life of the phono stage.
Allow at least 2” of clearance above the unit, and avoid placement on
a shelf directly above a heat and noise source such as a power
amplifier. Ideally, the shelf should be constructed of non-resonant
material to minimize microphonics.