Owner`s manual

6
Audio connections: Your headphone amplifier features 2 line
level stereo inputs with RCA jacks. You can connect to these the
outputs of a phono stage, CD player, DA converter. etc. You may
also connect the tape output or loop output of a preamplifier or
receiver. These choices will be determined by your listening
preferences and system configuration. If you chose to connect your
source component directly to your headphone amplifier, you can
connect the headphone amplifier’s output jacks to an input of your
preamplifier or receiver. This is a pass through circuit, similar to a
tape loop, and the level is independent of the volume control of the
headphone amplifier (unity gain). Due to the high quality sound of
your headphone amplifier, we recommend using quality interconnect
cables. Consult your Musical Surroundings dealer in this regard.
AC power cord connections: Your Fosgate Signature
headphone amplifier is fitted with a male IEC AC input connector and
supplied with a high gauge IEC grounded power cord. With the
headphone amplifier power switch in the off (down) position, attach
the female end of the power cord to the unit and the 3 prong AC plug
to a suitable AC outlet. Due to the high performance of this unit, you
may prefer a high quality after-market AC cord. Consult your Musical
Surroundings dealer in this regard.
Headphone connection: Your Fosgate Signature
headphone amplifier is fitted with a high quality ¼ inch
phone plug input. This is the industry standard for high
quality headphones. Insert the male ¼ phone plug from
your headphones completely into the female jack. If you
are using headphones with a “mini” connector, you must use a mini to
¼” adapter. Consult your Musical Surroundings dealer in this regard.