Operation Manual

12 / 24
2.1 Radio Channel Search
Use the arrow icon ，
at the radio interface to search for band channels.
When a channel is found, the search will stop automatically and the radio will start playing.
2.2 Band Search
Touch band search to select ：FM1,FM2,FM3；AM1,AM2
2.3 Automatic Channel Search
 When you touch this icon“ ”at the radio interface, the system will automatically
search from low frequency to high frequency until it finds channel with the strongest
signal.
 To stop the search, touch the icon again.
2.4 Preset Radio Channel
Each band can store up to 6 radio channels. The system can store 30 radio channels (18
FM channels and 12 AM channels).
2.5 Preset Radio Channel Manually
Long press preset radio channel button (1-6) for about 2 seconds to save the current radio
channel.
2.6 Stereo/Mono Switch（only applicable to FM）
The radio signal is stronger in the city where user can receive stereo sound. However, when
the signal is unstable, user can switch to mono mode to improve signal reception.
Switch to stereo mode through “ST”. The "ST" icon will appear when user is at stereo mode.
When it is off means stereo mode is off.
2.7 Radio interface with RDS