Owner manual

These steps are guidelines to help you install your new Mustang product. If you need further assistance
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern or send an e-mail to
[e-mail] or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Refers to part numbers: 75542, 76501, 76503, 76507, 76505, 79379, 79377, 76725, 76727, 76729, 76731
Mounting Suggestions
Harley-Davidson® Sportster 2004 - 2013
Passenger Seat
Tools Required:
•
Phillips Screwdriver
•
Allen Wrench Set
Hardware:
•
1/4-20 x 1” Allen Bolt (Included)
•
Spool Washer (Included)
Baseplate Features:
The baseplate is made of marine-grade fiberglass,
3/16" thick, finished in high gloss gel coat. Polyurethane
rubber bumpers prevent it from touching the frame and
fender and minimize vibration.
Fig. I
Mounting of Mustang Seat
1. Remove stock fender screw from rear tab of
Mustang solo seat.
2. Install supplied 1/4-20x1" Allen bolt and spool
washer in its place.
3. Slide slotted rear seat onto spool washer. (Fig. I)
4. Secure passenger seat to the fender with stock
fender screw to complete the installation process.
Enjoy the Comfort of your new Mustang Seat!
Updated 10/13/10 AA