Owners manual

REPACKING

Gently squeeze the Inflatable PFD with the oral tube dust cap in the

deflate position (Fig. 6, page 7) until all air or gas has been expelled

(Fig. 5, page 7). Do not wring or twist the Inflatable PFD. Put the oral

tube dust cap back in its stowed position on the oral inflation tube

(Fig. 6, page 7).

NOTE: Before following the repacking sequence, be

sure to properly re-arm your Inflatable PFD.

Figure 12

B C

Figure 13

View Status Indicator

Figure 14

1. Fold lapel (A) back along the dotted line (Fig. 12).

2. Fold sides (B) and (C) outward along dotted lines. Secure with

Velcro™.

3. Make sure inflator status indicator is viewable through window.

4. Make sure the inflator pull-tab is on the outside of the folded PFD.

Fig. 14 depicts a correctly folded PFD.

NOTE: Ensure that all Velcro™ strips are fastened.

IS YOUR PFD IN GOOD AND SERVICEABLE

CONDITION?

Check your Inflatable PFD between outings to be sure that it is

properly armed; that it is free of rips, tears or holes; that all seams are

securely sewn; and that the fabric, straps and hardware are still strong

(see "Readiness Checklist" on page 3). Inspect the inflatable

portion of the Inflatable PFD in accordance with the CARE AND

MAINTENANCE INSTRUCTIONS.