Owners manual

Inflatable PFD to your Mustang dealer for evaluation and/or

servicing.

CAUTION: To avoid accidental inflation, don't allow the

water to contact the inflator (MD2016).

iii) Perform a thorough visual examination. See Readiness

Checklist on page 3.

Perform these tests more often if exposed to potential

damage or used in extreme conditions.

3) After Each Inflation - Re-arm the Inflatable PFD. See Re-arming

Your PFD (MD2014) on page 8 or Re-arming Your PFD (MD2016)

on page 10.

4) Annually - Perform the following at the beginning of each

boating season, after inflation, or whenever the integrity of the

Inflatable PFD is in doubt:

i) Check all components for dirt or corrosion. Clean or replace,

as neccessary. See Readiness Checklist on page 3.

ii) Visually examine your Inflatable PFD for damage or excessive

abrasion, wear, tear or contamination. Particular attention

must be paid to the stitching, straps and hardware. If in

doubt, send it to your Mustang dealer for evaluation and/or

servicing.

iii) Perform the Oral Inflation Valve Test: See the Oral

Inflation Valve Test in the Every Two (2) Months Care and

Maintenance Instructions section.

iv) Perform the Leak Test. See the Leak Test in the Every Two (2)

Months Care and Maintenance Instructions section.

v) For MD2016 only. Ensure the current date is not three (3)

years past the date on the bobbin. If it is, re-arm the inflator

(see Re-arming Your PFD (MD2016) on page 10).

vi) Ensure the service indicator is green (Fig. 1).

vii) Record as an "Annual" inspection in permanent ink on the

Care and Storage label, in the Date Maintained column.

Repack the Inflatable PFD as outlined in the Repacking section on

page 13.

WARNING: If you are not confident in the self-

inspection and servicing of your Inflatable PFD in