Installation guide

P/N: 4809654 v5.0

I. Locate the supplied fuel pump and pump inlet

screen. Attach the pump inlet screen to the

pump and orient exactly as shown. (See Fig.

13-f.)

J. Secure the supplied fuel pump to the side of the

factory pump assembly using the #44 hose

clamp supplied. Verify that the hose clamp is

routed inside of the metal posts so that they can

be pushed down without restriction. (See Fig.

13-f.)

K. Slide the two supplied .75" long teflon sleeves

over the discharge of each fuel pump. (See Fig.

13-g.)

H. Using the supplied 17.0 stepless clamps and

2.75" length of Ø3/8" rubber hose, connect sup-

plied “Y” fitting to the distribution rail. (See

Fig. 13-e.)

Fig. 13-e

Fig. 13-f

Fig. 13-g

Y-FITTING

PUMP INLET

SCREEN

#44 HOSE

CLAMP

SUPPLIED

.75" LONG

TEFLON

SLEEVES

13. FUEL PUMP UPGRADE, cont’d