Specification Sheet

20
"
10
"
24
"
7
1
/
2
"
FILLER
PANELS
MOUNTING BRACKET
FLOOR
1-1/2” LEVEL
ADJUSTMENT
FloorWall
Top View
34
"
APPR
OX.
14
3
/
8
"
34
"
APPROX.
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
E-mail: [e-mail]. • Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
18F and 18W UTILATUB
®
Laundry/Utility Tubs — Premier
Design features:
 High strength, one piece molded construction
 Produced with Mustee’s proprietary DURASTONE® — combination
of fiberglass and crushed stone blended with special resins for extra
strength and durability.
 18 Gallon capacity, extra deep 13” tub with smooth surface
 Leakproof, integrally molded-in drain with stopper
 Connects to standard 1-½” P or S trap
 Accommodates single or dual-handle faucet with 4” or 8” center
 Large, self-draining back shelf with retainer curb that prohibits water
run-off except into tub.
 Floor model includes heavy gauge steel legs with adjustable levelers
 Wall model includes wall mounting bracket, side supports and
mounting hardware for securing tub to concrete or stud wall
 Mold and mildew-resistant components
 Easy to assemble and install
 Color-fast, marbleized white finish
Code Accepted:
UTILATUB® and UTILATWIN® Laundry/Utility Tubs meet or exceed performance requirements as listed:
 International Association of Plumbing and Mechanical Officials (IAPMO)® Listed
 Warnock Hersey® (Canada) Listed—CSA test standards: Laundry Tray - #B45.0 and #B45.5; Drain - #B125
 American National Standards Institute (ANSI)—Specification Z 124-2011
General: Furnish and install as shown on plans, UTILATUB®
Laundry/Utility Tub model____(18F, 18W), as manufactured by E.L.
Mustee & Sons, Inc. Tub shall be one-piece molded construction using
DURASTONE®, a blend of natural crushed stone and polyester resins
molded with matched metal molds under extreme heat and pressure.
Tub to include integrally molded drain assembly for connection to
standard 1-1/2” P or S-trap, stopper and wall mounting hardware or
heavy gauge steel legs with built-in levelers. 18 gallon capacity tub, 13”
deep. Shall meet ANSI Z 124-2011. Color: White. Weight: 18F 32 lbs.;
18W 28 lbs.
Colors & Models: Model Mounting H x W x D UPC
White 18F Floor 34” x 20” x 24” 6 71031 00026 2
White 18W Wall 34” x 20” x 24” 6 71031 00027 9
Specifications
SEE PAGE 2 FOR A LIST OF ACCESSORIES!