Installation Guide

MUSTEE
SHOWERTUB™
INSTALLATION INSTRUCTIONS
U.S. PATENT PENDING
30"
60"
15"
8
1
2
"
C
L
5
1
2
"
C
L
DRAIN
Slip - resistant
floor pattern
STARBURST
®
Tile Flange
“ROUGH-IN”DIMENSIONS
FITS INTO STANDARD 5FT. BATHTUB ALCOVE
· ·
U
P
C
R
IMPORTANT NOTES:
We suggest that shower compartments be equipped with handrails that comply with
ANSI-A117.1-1986 Consumer Safety requirements
SHOWERTUB™ IS NOT TO BE INSTALLED IN FRONT OF DRYWALL
Thoroughly READ and UNDERSTAND instructions before beginning installation of your MUSTEE ShowerTub™
·
·
·
DRAIN OPTIONS
The ShowerTub™ is designed to connect to a 2” nominal pipe or 1 1/2” tub waste, connected to a trapped/vented
sanitary waste line. Refer to “Rough-In Dimensions” for proper placement and drain center lines.
Mustee drain options are (order separately) as follows:
1.) 42.317A for 2” schedule 40 ABS, PVC or Iron pipe with drain seal connection.
2.) 60.300A (White) or 60.300ABN (Bone) Drain Kit for connection with 1 1/2” or 2”
DWV or soil pipe connection.
U
P
C
R
Before connecting either option, check to be sure that you are in full compliance with local code
regulations.
Quality Plumbing Products
E. L. MUSTEE & SONS, INC.
5431 West 164th Street • Brook Park, OH 44142 SI-199 (10•15)