Dimensions Guide

30"
60"
15
"
8
1
/
2
"
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
E-mail: [e-mail]. • Web: www.mustee.com • Proudly made in the USA
3060 ShowerTub
™
Easy Access Shower Floor
Design features:
 Produced from high-grade, reinforced, molded fiberglass for optimum strength
and impact resistance using matched metal molds under heat and pressure.
 Ideal for new or remodel projects…fits DURAWALL
®
Shower Walls (see
Accessories section) as well as ceramic tile or preformed wall kit.
 Fits 60” wide by 30” deep alcove…same footprint as a standard bathtub
 Drain hole is offset 8-1/2” x 15” for connection to 2” DWV piping
 Easy entry 4-1/2” threshold
 Slip resistant Starburst
®
surface helps rapidly evacuate water to the drain
 Available in both LH and RH drain locations
 Available in white or bone
 Smooth, colorfast semi-gloss finish, resists scuffs.
 Mold and mildew-resistant…easy to clean
 Available STYLEMATE
®
shower enclosures feature tempered safety glass and
a range of finishes (see Accessories section).
General: Furnish and install as shown on plans, CareGiver™ ShowerTub™
model 3060 as manufactured by E.L. Mustee & Sons, Inc. Floor to be one-
piece, molded fiberglass, using matched metal molds under extreme heat
and pressure. Surface to be slip-resistant design that does not interfere
with flow of water. Size: 30” x 60”. Flood level rim will be not less than 3”
high. Tiling flange will extend not less than 1” higher than the threshold
which is an integral molded water barrier. Threshold will be 4-1/2” high.
Offset 2” drain hole on 8-1/2” by 15” centers to accept standard 1-1/2” tub
waste. Available on right or left hand. Color ____(White, Bone).
Code Accepted
 IAMPO
®
Listed
 American Society of Testing and Materials (ASTM) – D.635, E-84 and E-162 Fire Retardancy
 American National Standards Institute (ANSI) Specification Z 124-2011
 Inhalation Toxicity Test
Specifications
SEE PAGES 2-5 FOR A LIST OF ACCESSORIES!
Model Description Drain Location Fits Alcove UPC
3060R White RH 30” x 60” 6 71031 00355 5
3060RBN Bone RH 30” x 60” 6 71031 00356 0
3060L White LH 30” x 60” 6 71031 00357 7
3060LBN Bone LH 30” x 60” 6 71031 00358 4
Top view - Reverse for RH installation.