Dimensions Guide

(Metric)
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
E-mail: [e-mail]. • Web: www.mustee.com • Proudly made in the USA
350 DURAWALL
®
Fiberglass Bathtub Wall
Design features:
 Produced from high-grade, reinforced, molded fiberglass for optimum
strength and impact resistance using matched metal molds under heat
and pressure.
 Ideal for new or remodel projects…fits all Topaz
™
Fiberglass Bathtubs, as
well as standard 30” x 60” bathtubs of other manufacturers.
 Includes a large, molded-in, self-draining shelf ideal for shampoo, soap, etc.
 Three panel wall system with seamless corner panels and overlapping
edges, create a watertight wall surround.
 Panels can be trimmed to simplify installation in out-of-plumb alcoves or
for installing DURATRIM
®
window kits.
 Adhesive and caulking provided
 Adhesive mounts to drywall or like surfaces
 Available in white, bone or biscuit.
 Smooth, colorfast semi-gloss finish, resists scuffs.
 Mold and mildew-resistant…easy to clean
General: Furnish and install as shown on plans DURAWALL® Bathtub Walls,
model 350, as manufactured by E.L. Mustee & Sons, Inc. The wall system shall
be three-piece construction with molded-in shelf and double face tape applied
to edges of underside for a better seal. Panels shall include 20% fiberglass
reinforced composite material and be manufactured with matched metal molds
using extreme heat and pressure with a uniform thickness of 70 mils. Shall be
semi-gloss, scuff-resistant surface. Unit shall meet or exceed applicable tests,
per ANSI Z 124-2011. Color ____ (White, Bone or Biscuit). Shall include adhesive,
caulk and instructions. Weight 62 lbs.
Code Accepted
 American Society of Testing and Materials (ASTM) – D635, E-84 and E-162
 American National Standards Institute (ANSI) - Specification ANSI Z 124-2011
 Inhalation Toxicity Test – to evaluate inhalation health hazard with combustible products.
 CAN/ULC S102-07 Burn and Smoke Test
Specifications
SEE PAGE 2 FOR A LIST OF ACCESSORIES!
Model Color Fits Alcove UPC
350WHT White 30” x 60” 6 71031 00266 2
350BN Bone 30” x 60” 6 71031 00267 9
350BT Biscuit 30” x 60” 6 71031 00379 9