Coastal Industries Inc. FAX NO. (904) 641-1697 P.O BOX 16091 JACKSONVILLE FLORIDA 32245 TELEPHONE NO.
PARTS LIST KEY PART LETTER NUMBER A 600 HEADER 1 B 602 SILL 1 C 601 WALL JAMB 2 D ---- E 8156 F 8155B G 8154 H 69 DESCRIPTION QUANTITY DOOR PANEL ASSEMBLY 2 FINGER PULL, TOWEL BAR 2 SLEEVE, TOWEL BAR BRKT 4 TOWEL BAR BRACKETS 4 TOWEL BAR 2 I PN193 J 832HEX ROLLER 4 ROLLER SCREWS 4 K 832114 L 8112 TOWEL BAR SCREW 4 INSTALLATION SCREWS 5 M 1329 PLASTIC SCREW ANCHOR 6 N 5169 BUMPER 2 P CP606B TRACK GUIDE 1 R CP110 S 38 T 82F U CP104TW V
STEP 4 Secure Wall Jambs BEFORE STARTING Before starting unit installation, Please check the box contents against the parts list. Make sure all material is accounted for. STEP 1 Measure base opening & cut Sill Reposition Wall Jambs as before and secure to shower walls using five (5) #8 x 1-1/2" Installation Screws (L), see exploded view - sheet 1. Measure the base opening along center of shower curb as shown in figure 1, then trim Sill (B) to measurement obtained.
STEP 7 Door Panel Installation STEP 9 Towel Bar Installation Start by sliding a Sleeve (F) . . . flat end first . . . over each of the four Towel Bar Brackets (G) as shown in figure above. If not already closed, close Door Panels (inside Panel against shower head wall and outside Panel against opposite wall). As shown in figures 9A & 9b below, begin by installing inner Brackets first and securing Brackets with a #832 x 1-1/4 Towel Bar Screw (K).
