Specification

 3-Piece Molded Fiberglass Walls Interlock and Mount (with
screws) Direct-To-Studwalls
 Fit Mustee 3232M and 3232BN DURABASE® Shower Floors
 4 Molded-in Shelves and Built-in Towel Bar
 Available in White and Bone
 Smooth Glossy Finish, Colorfast and Waterproof
 Easy to Clean, Resistant to Mold and Mildew
 Preferred by the "Pros"
Code Accepted
Fiberglass DURAWALL
® Shower walls meet or exceed performance requirements:
 American Society of Testing & Materials (ASTM)-D-635, E-165-75, E-84
 American National Standards Institute (ANSI)-Specification Z124.1
 Inhalation Toxicity Test - to evaluate inhalation health hazards with combustible products
E. L. Mustee & Sons, Inc.
5431 West 164th Street
Brookpark, OH 44142
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.mustee.com
SPECIFICATIONS
Model No. Color Nom. Size UPC Fits Durabase
732WHT White 32"x32" 6 71031 00248 8 3232M
732BN Bone 32"x32" 6 71031 00249 5 3232BN
General: Furnish and install as shown on
plans, 32" square shower, DURAWALL
®
Shower Walls Model 732, as manufactured
by E.L. Mustee & Sons, Inc. Shall be 3-
piece, molded fiberglass wall with minimum
thickness of 25 mils and mounts direct-to-
studwalls. Includes center panel with
molded-in shelves, built-in towel bar and
two side panels with molded-in shelf. Self
aligning panels interlock using a tongue-
and-grove connection. Shall meet ANSI
Specification Z 124.2A—1990. Color____
(White, Bone).