User Manual

13
Scan and Save
Ensure Wi-Fi function is enabled on Wireless Scanner and
connected to your device prior to use.
NOTES
NOTES
From iPad, iPhone and iPod touch
1. Tap iScan Air on your device to open it.
2. Place a photo/document facing up,
adjust the
Paper Guide
, slightly push
photo/document
in
until it is gripped by the rollers and pulled into
the Feed Slot.
3. Tap the Scan button. The device’s screen
shall show a real-time preview while scanning.
4. Tap the Save button to save the scan result
to the device’s photo library.
* If you want to scan it again press Cancel button and
repeat the above steps.
When using Scanner the first time with devices running on iOS 6 or later,
a message ‘iScan Air Would Like to Access Your Photos’ shall appear after
pressing SAVE button. You must tap ‘OK’ in order to save image to your
Photos library. If you select ‘Don’t Allow’, no image will be saved in your
device, and you will get an Error message for next scan. Please follow on-
screen message to solve the problem by selecting Settings > Privacy >
Photos > iScan Air > "ON" to allow the iScan Air app to access your photos.
IMPORTANT
IMPORTANT