User's Manual

7
BLUETOOTH HEADSET GETTING STARTED
BLUETOOTH HEADSET GETTING STARTED
EN
Pairing with a Bluetooth Phone
and blue alternately, and enters the
pairing mode.
3. Search for Bluetooth devices by
following the phone’s operating
instruction.
4. Select “MBT-H120” from the
searched devices list and confi rm it.
Enter the passkey “1234” and
confi rm it.
After fi nishing the pairing process,
the indicator LED will fl ash blue.
( Notes:
1) The operable range without obstructions
is up to 10 meters (approximately 33
feet) between your headset and the
Bluetooth devices.
2)
Your headset can save the pairing infor-
mation of up to 8 phones, but connect to
only one phone at a
time.
Before operating your headset with a
Bluetooth phone, you must execute
“Pairing” process to create a link
between the devices.
To pair with a Bluetooth phone,
please follow the instruction below:
Ensure the headset is ON and
enters the standby mode with
fl ashing blue LED once rapidly
every 3 seconds.
( Note: When powered on, the headset
will attempt to connect to an available
Bluetooth device. Please press the
Power button to switch to the standby
mode. )
2. Press the Volume Up button for
approximately 4 seconds until the
indicator LED starts to fl ash red