User's Manual

16
Q4. The Link LED and the TRx LED of the cardbus adapter are not on.
A4. This is often caused by an unsuccessful installation. See below for remedies.
 Check if the hardware (adapter) is found by the system.
Right-click on My Computer icon and select Properties. Select Hardware tab
and click Device Manager. Double click on Network Adapters. Check if your
cardbus adapter is listed.
If the adapter is not listed in the Device Manager, re-load it.
 Check if the driver is installed properly.
Right-click on your cardbus adapter. Select Properties and check the Device
status field. Select Driver tab to check if the driver is installed properly.
If the driver is not successfully installed, click Update Driver to re-install.