Digital Camera User Manual
A Quick Start of This Digital Camera • Before using this camera, you may want to learn its main functions: Still Camera Mode In this mode,You can take pictures and movies. Mass Storage Mode (USB Portable Disk) In this mode, your camera will behave like a harddisk which contains your picture files. You can drag-and-drop pictures to your computer. PC Camera Mode You can export video to the network or a computer in this mode, which has two compression settings and framerates to choose from.
Table of Contents A Quick Start of This Digital Camera Table of Contents System Requirements Getting to Know Your Digital Camera Functions and Modes Power How to record images and short movies 2 3 4 5 6 6 7 How to Correct Fluorescent Banding Noise Something About the Light Condition Mode Button Mass Storage Mode(USB Portable Disk) PC Cam Mode Changing Image Resolution The LCD Display Backlight On/Off Self-Timer Delete Software Installation Technical Specifications Camera Cautions 7 8 8 8 9 9 9 9 10 10 11
System Requirements For Microsoft Windows® Users • Compatible with Microsoft® Windows® 98SE, Me, Windows® 2000 and Windows® XP • Direct Show 8.0 or later • Pentium® 200MHz or Pentium® compatible processor • 32 MB RAM or higher • USB Port • 200 MB free disk space • CD-ROM Drive • Color Monitor with High Color (16-bit) graphic capability or higher • Standard mouse and keyboard • Some models may not function properly due to proprietary software which could clash with our driver.
Getting to Know Your Digital Camera Refer to the picture below for a quick overview for your Digital camera. Shutter Power Button Mode Button Front LED Lens Front View Delete LCD Backlight Previous/ Resolution Next/ Self-timer LCD Display/ Viewfinder Back View USB Port The USB (Universal Serial Bus) allows you to connect your Camera to a PC. One end of the USB cable goes to the camera’s USB port and the other end goes to your PC’s USB port.
Functions and Modes You can cycle through the modes by pressing MODE button. If your camera is not connected to a computer, you can only access the Record and Playback Modes. If your camera is connected to a computer, you can access the additional two modes. Record Mode Playback Mode Power On Without USB connection Mass Storage Mode (USB Portable Disk) PC Camera Mode Power With USB connection Power On/Off Press the Power Button to activate your Camera.
How to record images and short movies The Picture Counter Under normal condition, you can take as many as 180 Low resolution or 30 High resolution or 20 Fine pictures. You can see the remaining picture counter displayed on the top right corner of your LCD. If you have taken 5 pictures at fine resolution, you can shoot another 15 pictures at that resolution. Your LCD will display “15.” Taking Your First Picture 1. Please press the Power Button to turn on your camera. 2. Make sure you’re in the Record Mode.
). This must match up with the frequency of the main power supply in your country. Please refer to the following figures: 50 Hz is used in: Europe, P.R.C., Hong Kong,Australia, New Zealand and South Africa. 60 HZ is used in: America, Canada, Taiwan, Japan,and Korea. Something About the Light Condition This camera does not have a flash light. Therefore, it can not take pictures when the light is really dim. If you try to shoot under low light, the LCD will display “LOW LIGHT.
PC Cam Mode When you’re in the Mass Storage Mode, press MODE again to enter PC Cam Mode. In this mode, you can use the specified software to display web video on a computer. Changing Image Resolution You can change image resolution whenever you want. Button. 1. In Record Mode, press the 2. The LCD will display your current resolution setting on the top left corner. Which could be for Fine Resolution or for High resolution or for Low resolution.
Self-Timer To use the self-timer, press the Button to activate the 10-second built-in selftimer. You will see a icon on the camera’s top left side. Press the Shutter Button to start counting down. The camera’s front LED will blink until a picture is taken after 10 seconds. ATTENTION: When your camera’s internal memory is full, the LCD will display a huge icon in the center with “Memory Full” under it. If memory is full, you can not take any new pictures.
Software Installation How to Install the Driver 1. Insert the CD-ROM disc into the CD-ROM drive and close the CD ROM draw. 2. An installation wizard will automatically launch. 3. Click the driver’s icon. 4. Follow the instructions presented on the screen to complete the installation. 5. Select the Language that you want and press "OK" 6. Click "OK" to restart your computer and wait for your PC to restart automatically.
Technical Specifications Imaging device: Image Resolution: CMOS Sensor Fine: 2048 x 1536 (Hardware enhanced) High: 1600 x 1200 Low: 640 x 480 Compression Format: JPEG/AVI Image Storage: Fine 20 pictures, High 30 pictures, Low 180 pictures Memory: 16 MB Flash Lens: F2.8 Focusing range: 60 cm ~ infinity Shutter: 1/15 ~ 1/4000 second Self-timer: 10-second delay White Balance: Auto Exposure: Auto I/O interface: USB Power Source: AA Alkaline Battery x 1 Size: 72.5 x 62 x 19.
