User manual

17
2. Installation
2.1 Installation Safety Instructions
● Installation Personnel
● Installation Environment
Do not install and operate the UPS when water
condensation happen which may occur if the UPS is moved directly
from a cold to a warm environment. The UPS must be absolutely dry
before being installed and operated. Please allow an acclimatization
time of at least 2 hours. Otherwise there is hazard of electric shock!
Do not install the UPS in the environment where it is damp
or would be exposed to direct sunlight or near heat. Ensure the UPS
is far away from water, inflammable gas and corrosive agents.
Do not block air vents in the housing of UPS. The UPS
must be installed in a location with good ventilation. Ensure enough
space on each side for ventilation.
This product must be installed only by qualified or
professional personnel accord to safety
You must read the following safety instructions before
installation!