Specifications

TP-5700/5800 series Technical Manual 4 - 2
12 V DC IN CONNECTOR
PIN ASSIGNMENT OF 4 PIN PLUG:
PIN # DEFINITION
1 +12 V
2 +12 V
3 GND
4 GND
CASE CHASSIS GND
VGA CONNECTOR
l This port is a standard 3 x 5 D-sub VGA connector
PIN # DEFINITION PIN # DEFINITION PIN # DEFINITION
1 RED 6 GND 11 NCID0
2 GREEN 7 GND 12 NCID1
3 BLUE 8 GND 13 HSYNC
4 NCID2 9 NC/+12VKEY 14 VSYNC
5 GND 10 GND 15 NCID3
CASH DRAWER CONTROLLER
l This is a RJ11 jack for cash drawer control providing control ability
over two cash drawers.
l Each cash drawer solenoid input is a 150 msec. grounding signal.
l The power to cash drawer solenoid is DC 12 V nominal.
l The command to open cash drawers is decoded through COM 1.
l The drawer open indication can be detected by software through status
check on RI signal of COM 1.
l Should any difficulty occur in using the cash drawer controller, please
try to arrange a serial printer to be connected to COM 1 so that the
hardware handshaking signals can be properly handled.
1
3
CASE
2
4