Specifications

TP-5700/5800 series Technical Manual 5 - 7
10 seconds after sending the query command and to send the other query command only
after first response checked to avoid any possible ambiguity.
POSIFLEX TOOLS
In the preinstalled OS there will be a program group named Posiflex Tools if
any of the PS2 interface touch panel, UPS battery is installed and the deluxe security
device KP100. There will be a “Posiflex Touch Calibrator” and a “Posiflex Touch
Manager” in this group for the PS2 interface touch panel. The touch calibrator is a tool
for the user to recalibrate the touch screen once required. The touch manger allows the
user to define the touch response as beep sound control and double click speed. There
will be a “Posiflex Power Switch Manager” in the tool group for the UPS battery
installed. This utility automatically detects the existence of the UPS battery and handles
hardware setup accordingly besides the power control functions over the hardware
power on/off switch and the software power off function. There will be a “Posiflex
Programmable Keyboard” in the tool group if KP100 is installed. There will also be a
“Posiflex MSR Manager” in the tools group if a MSR is included in the installed
KP100. However, please note that this MSR manager won’t be applicable for the MSR
in SD100 -- the other type of upgrade kit. Maneuvering MSR behavior over SD100
requires some hardware modification.
The user may have also noticed that there can be program(s) “Posiflex Power
Switch Init” or “Posiflex MSR Init” in the StartUp program group or “Posiflex Power
OFF” in “Program Files” or “All Programs” menu or some shortcut links in Start menu
or on desktop per content installed in Posiflex Tools. These Init programs are required
for their related devices to function properly in Windows. The “Posiflex Power OFF”
provides the software control over the power management system. Details of the
Posiflex Tools follow.
TOUCH CALIBRATOR
This function can recalibrate the touch panel with the LCD display panel. After
clicking “Start”, the user is requested to touch the lower left corner and upper right
corner of the screen consecutively and then the confirmation block to ascertain the
calibration. Clicking “Exit” saves the calibration parameters and exits the program.