Specifications

TP-5700/5800 series Technical Manual 5 - 10
off command. However, this command must be engaged to turn the power off when the
power switch is set to “ON Only”.
SAVE AND EXIT
Clicking on this item saves all parameter and exits the program.
CANCEL AND EXIT
Clicking on this item discards all parameter changes and exits the program.
PROGRAMMABLE KEYBOARD
STARTING THE PROGRAM
This program applies only to the KP100 upgrade kit side mounted to a
TP5700/TP5800 series. It is assumed that a PS2 keyboard is connected to the back of
KP100 for entering data to be programmed into its programmable keys. If this program
is started without a KP100 connected, in failure of detecting a KP100, it will ask for
subject to program between KB4000 and KP100 series. Please select KP100 to start an
offline programming. Please prevent any action on keyboard, mouse or touch on screen
when the indicates so to have a proper detection on the KP100.
KEY MAP
The upper part of the screen display in this program below the command menu
represents a map in the key-layout of the programmable portion on the keyboard. Each
key is identified by a 2 character notation, in which the first letter stands for column, the
second number stands for row. The identification where current cursor is will be in
pink color while the rest in gray. The lower part of the screen display are editing areas.
When you touch any position in the upper map, that position becomes pink, the left row
of lower part becomes same column of keys in the map and the right row of lower part
becomes contents of each key in that column. At this moment the corresponding key in
the lower left row shows pink background. If you touch any position in the lower left
column, you may notice that the background color of that key turns into blue. This
indicates that you may edit the notation of that key in this program. When you touch any
bar in the lower right column, the position in lower left column corresponding to this