Specifications

TP-5700/5800 series Technical Manual 5 - 11
bar turns into yellow to indicate that you are now editing the content of this particular
key.
COMMAND MENU
Please remember that if the keyboard programming utility ends without any
“Save” (to file) or “Write” (to keyboard) operation, every effort done in this utility will
be washed away leaving no slightest trace. Please always “Write” to keyboard in order
to “program” the KP100. Materials below help mastering this programming utility.
File – “Open” to load an existing template file into the program for editing. “Save” to
store the edited result into a template file. “Exit” to exit the program.
Keyboard – “Read” to load the content of the connected KP100 into program for
editing. “Write” to store the edited result into the connected KP100.
Edit – “Copy”, “Paste” and “Clear” functions over key map.
View – This menu is used to switch among “Pages” of the keyboard and is not
applicable to KP100.
Config – Beep function on key press and “Intercharacter Delay” are defined in this
menu. The so-called “Intercharacter Delay” determines how fast a string of
characters defined in each key are transmitted to the host TP system when that
key is pressed in application.
MSR – This menu is only applicable to KP100 of revision A0a. Please apply MSR
manager for most of MSR in KP100.
About – Version information of this utility.
Help – This menu was intended for giving guidance for programming the special
content. However, it has no action in this program.
Exit – To quit this program.
SPECIAL KEY CONTENT
To program a key containing any special function keys such as the “F1” through
“F12” or even some special keys only for particular language keyboard (“Muhenkan”
“Henkan” Hiragana”), the user shall right click the mouse at the editing bar in lower
right column. On mouse right click, there will be some editing functions in left column
of a popup box and special content selections in right column. After such contents are