Specifications

TP-5700/5800 series Technical Manual 7 - 6
rubber sleeve. Then insert the copper sleeve from the bottom of the bracket so that the
screw and washer can fix the bracket from top.
REPLACE MAINBOARD
After removal of HDD or HDD and the CD ROM adaptor card PST069 for
system since revision D, please remove the 4 (round head) screws at the bottom of the
connector panel and the 8 screws holding the mainboard to the back cover assembly.
Disconnect the exhaust fan and raise the mainboard up along the HDD support posts.
Unscrew the hex head screws of the connectors on the connector panel to release it
from the mainboard and screw them back to the mainboard in case of mainboard
replacement.
No further disassembly on the back cover assembly is allowed except releasing
the exhaust fan from the metal box. Such disassembly operation by any non-well-trained
people will almost doomed to cause damage without awareness of the occurrence. Such
damage is strictly the responsibility of the person who intended to disassemble and is
not covered by the product warranty.
To reassemble the whole system back, please just do the counter actions in
reverse order.
Screws holding mainboard
are circled in these pictures