User manual

the Back Button and turn the Control Wheel to <Auto Pr ogram> and press the
Enter Button to enter Auto
Progr am Mode.
The system
wi ll search the stations between 87.50MHz and 108.00MHz
automatically and will show the frequenc y. At the same time, it will store the
received stations.
(30 stations at most)
I----FM Menu-----l
The Auto Program interface as below:
Preset Mode
Channel List
,.
lII
i'i1W ..
t
&
Programing ...
104.80
A
v
After search is completed, it will automatica ll y revert back to the Channel List.
The Channel List
will show the number of received stations, any previously
stored stations
w ill ha ve been replaced.
Tune Mode
During normal radio operation, press the Back Button to enter into the
FM Ma'n
Menu:
I
\-----FM Menu ------I
Channel List
Auto
Program
l.i.,i§i'4;yitW "
Turn the Control Wheel to <Tune Mode>, press the Enter Button to enter Tune
Mode for manual tuning thereafter.
Turn the Control Wheel and the frequency
will change by rate of 0.05MHz
per step. Clockwise means the frequency increases, anticiockwise means the
frequency decreases.
Turn the Control Wheel to locate the radio stations that
you want to listen to.
Clear
All List
To access the Clear All List menu during normal radio operation, press the Back
Button and turn the Control Wheel to <Clear
All List> and press the Enter
Button to enter the Clear
All List menu.
In the Clear All List menu the radio can delete all the stations in the Preset List
and Channel List.
Once selected, a screen prompt appears to confirm this action, as below:
Clear All Prestored
FM Stations?