User manual
Firmware Update
Check for Updates
If
you
initiate
an
update, the device checks for a connection and whether there
is
a firmware update available. If both these conditions are met, a progress
screen
is
displayed and the firmware installed. The new firmware
is
flashed
to the de
vi
ce, and
in
the next restart
of
the radio, the new firmware version
becomes the master version.
Note:
In
the process of updating firmware, please do not power
OFF.
Powering
OFF
during the update process may cause irreparable damage.
Revert to Backup
This allows you to change the running firmware
ve
rsion to the backup firmware
version, which
is
also stored
on
the device. The Master Version and Backup
Version
can
be switched
freely.
Firmware Information
Displays
the master software version, the backup version, the
boot
loader
version and the hardware version.
<Master Software Version>:
It will show the current software loaded on the
radio.
<Backup Software Version>:
It
w
ill
show invalid from production, but may be
updated
later.
<Loader Software Version>: Default version 4.1.
Now Playing
Returns to the Now Playing menu, and displays the current station, the battery
level
and the signal strength.
Internet Radio Operation
Basic Operation
Powering
On
For the Fir
st
Time
Press the Power
Button
for more than 3 seconds, the green indicator bar
illuminates and the welcome screen appears. A search for local
Wi
-Fi
network
starts
automatical
ly.
1.
The radio runs the network setup wizard, starting with a scan for available
networks
locally.
T
he
result
is
a list of networks found. Highlight the network you
wish to connect to (using the
Control Wheel) and press the Enter Button.
2.
If
the network
is
secured, you
are
then prompted to enter the network key or
passphrase. The
Internet Radio then returns you to the normal screen, where
the connection sequence takes
place and then the preferred station starts to
play.
Note: This security key or passphrase
is
found from your wireless router. See
your
wireless router for details.
To
enter the network
Key,
turn the Control wheel anticlockwise for letters and
clockwise for numbers. Press the Enter Button after each individual character
is
entered.