User manual
m
This
is
the Normal Screen for
FM
Radio operation. This screen shows signal
strength, Radio operating mode
(Seek, Preset, Tune etc) battery condition,
channel frequency and any
RDS
information available.
Seek
Mode
The default
display shows the Seek Mode.
To
access the Seek Mode menu
during
normal radio operation, press the Back Button and
Turn
the Control
Wheel to <Seek Mode> and press the Enter Button to enter Seek Mode.
Turn
the Control Wheel to search for
FM
stations automatically.
Turn
the control
wheel clockwise to seek
in
a frequency increasing direction and anti-clockwise
to seek
in
a frequency decreasing direction.
When the search function finds a radio station, it
w
ill
stop and broadcast
automatically.
Preset Mode
T.
FM
Seek
87.80
MHz
The
Preset Mode
is
used to store the desired stations.
(30
stations at most)
When under the
Seek Mode, Preset Mode, or Tune Mode, press the Enter
Button, to
enable a quick channel selection box. Turn the control wheel to
select accordingly.
Under the
Seek Mode,
Tune
Mode, or Channel List, choose the desired stations
and press the Enter Butto
n,
it
will
show channel selection box, turn the Control
Wheel
to
se
lect a channel and press the Enter
Bu
tton for about 2 seconds.
Syst
em
w
ill
store the station. At the same time, the station
wi
ll flash twice to
show it has been stored successfully. After it has been done, system
will back
to the interface of
original mode.
As
below:
T.
Preset
CII
ullltill~I=EI
10
1.20
4.1
0
3.
00
MHz
5.104
.
90
M
Hz
Channel List
Cha
nn
el
Li
st is generat
ed
by the Auto Program function (described below). The
Channel
Li
st
wi
ll
be updat
ed
each time you
se
lect Auto Program.
Channel
Li
st with pre-listening function, when move to a different radio station,
the system
w
ill
play the correspondi
ng
radio programs. Select the desired
rad
io
stat
io
n and press the Enter Button, the system wi
ll
switch to Seek Mode and
broadcast
it.
If th
ere
are
the same radio stations
in
the preset
list,
it will show the
se
ri
al number of t
he
station,
if
without the same stations,
it
wi
ll
not show.
Auto Program
To access t
he
Auto Program Mode menu during normal radio operat
ion,
press