Owner manual

Control Elements and Terminals

MC-1.2 Front Panel

432 51 6 7

1 »POWER«

This red LED lights up when the unit is switched on with the rear panel power switch.

2 »MENU«

Use this key to access the different menus.

3 »SELECT«

Use this key to select a function within a speciﬁc menu.

4 »AUDIO

IN«

This menu allows to select the one of the four, respectively ﬁve digital audio inputs/formats for converting into an USB audio

stream to send it to your computer or laptop.

5 »STATUS

SYSTEM«

This menu indicates various signal lock conditions of the incoming reference signals and the power supply status of the whole

device.

6 »STATUS

AUDIO INPUT«

This menu informs about the status bit settings within a received digital audio signal.

7 »CLOCK

IN«

This menu indicates the clock rates of the incoming USB audio stream (»U«) and the the digital audio signal (»A«).

432 51 6 7 8

1 »S/P-DIF OUT«

These two S/P-DIF outputs, available as optical and coaxial interfaces, transmit an optical (»OP«) and unbalanced electrical

(»CO«) S/P-DIF digital audio or blank frame signal in compliance with the IEC 60958 standard. The coaxial interface impedance

is 75 Ω. (RCA connector), the optical interface offers a Toshiba Toslink

connector, EIAJ standard.

MC-1.2 Rear Panel