Manual

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

B E D I E N E L E M E N T E

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

Manual SDs-01 D 3.2.2003 17:45 Uhr Seite 3

CONTROL ELEMENTS AND TERMINALS

MC-3 SMART CLOCK Front Panel

1 POWER

This red LED lights up when the unit is switched on with the rear panel

POWER switch (on condition that the adjusted voltage matches your local

voltage).

2 MENU

Use this key to access the different functional menus.

3 SELECT

Use this key to select a function from a specific functional menu.

4 CLK BASIS

This functional menu enables the setting of the base clock rate between

32.0kHz and 192.0kHz.

5 CLK MULTIPLIERS

This functional menu lets you determine the factor by which the basis

clock rate is multiplied additionally. This setting can be made individually

for every Word Clock pair of outputs as well as for the AES/EBU and S/PDIF

outputs.

6 WCLK OUT 4

This pair of Word Clock outputs transfers either all standard Word Clock

rates as well as Word Clock x 256 for older digidesign ProTools™ systems.

Their numbering is aligned to the corresponding functional menu on the

front panel. For adjusting these outputs see chapter OPERATION.

MC-3.1 SMART CLOCK SD Front Panel

Refer to the OPERATIONS chapter for more

information.

Basis operation of MC-3.1 SMART CLOCK SD is aligned to this one of

previously described MC-3.

1 SD VIDEO

Within this functional area the standard definition video sync reference

generator can be set to output PAL, NTSC or NTSC black + white.

2 SD FORMAT

Use this key to change the output format of the selected video sync refer-

ence signal between Black +Burst, composite sync and color bar.

For detailed specifications on all terminals,

refer to the »Pin Assignment of the

Connectors« and »Technical Data« in the

chapter APPENDIX.

432 5