User Manual

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
88
\
BEDIENELEMENTE
BEDIENELEMENTE
BEDIENELEMENTE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Manual SDs-01 D 3.2.2003 17:45 Uhr Seite 3
13
GENERAL OPERATION
Selecting Function Menus and setting Functions
Operating the MC-3+ SMART CLOCK is very easy! The device is fully
operated using the two keys at the front panel.
1 Pressing the »MENU« key toggles between different basic function
menus.
2 Pressing the »SELECT« key activates individual functions within one
function menu.
Steps of Operation
1 The first press on »MENU« or »SELECT« key enables the last selected
function within the last selected function menu. The corresponding LED
starts flashing.
2 Every press on »SELECT« button will select a new function within a menu.
The LED of the selected function flashes accordingly. After the LED stops
flashing, the function is activated.
3 When the needed function is selected, do not press the switches again!
After a period of approx. 4 seconds the LED of the selected function stops
flashing.
The »STATUS« area is not accessible by using the »MENU« and »SELECT«
keys, it only shows different operating conditions of the device.
Safety Instructions
For safety reasons, be sure to
read the SAFETY INSTRUCTIONS
and INSTALLATION chapters before first
powering-up!
We also recommend reading the CONTROL
ELEMENTS AND TERMINALS chapter for
information on how to connect MC-3+ !
!
2. SELECT
selects individual
functions within
one function
menu.
1. MENU
selects individual
function menus.
MENU + SELECT operation
Function Menus + Functions
Menus
Functions