User Manual

\\\\\\\\\\\\
INTRODUCTION
INTRODUCTION
INTRODUCTION
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
88
Manual SDs-01 E 3.2.2003 18:26 Uhr Seite 5
8
Applications
Audiophile sound improvement of digital audio devices
Elimination of »clicks and pops« in audio recordings
Enhancing and stabilization of existing clock chains
Stellate, ultra-low-jitter clock signal supply
Addition of redundancy to clock chains in use
Increase of clock signal reliability during live events
Multiple clock rate synchronization
Peripheral MUTEC Products
Signal Distribution Amplifiers:
MC-2
The MC-2 is a high-performance digital audio and reference sync signal
distribution amplifier for AES3/11 and AES3/11id signals. The unit dis-
tributes and converts between the mentioned AES signals and interface
standards.
MC-7
The MC-7 is a flexible, high-performance 8-channel Word Clock distribu-
tion amplifier and audio clock converter.
Format and Sampling Rate Converters with internal Master Clock:
MC-4
The MC-4 is a high-performance digital audio multichannel format and
sampling rate converter for ADAT
TM
, AES3 and S/P-DIF
MC-6
The MC-6 is a high-performance digital audio dual channel format con-
verter for AES3, AES3id and S/P-DIF.
MC-8 + MC-8.1
The MC-8 and MC-8.1 are 8 channel, high-performance digital audio
and sampling rate converters for AES3 and AES3id.
Accessories:
Optical cables in different lenghts from 0.5 m to 20 m for S/P-DIF and
ADAT
TM
transfers.
MW-05/19
Set of two rack mounting angles to install one MC product frontally
into one unit of a 19” rack.
MW-03/19
Set of two rack mounting angles to install one MC product on the rear
side of a 19” rack.
MW-02/19
Mounting plate to install two MC products side by side into one unit of
a 19” rack.
For all peripheral products please have a look on our website:
www.MUTEC-NET.com