User Manual

ManualsBrandsMUTEC ManualsAudioMC-3+ Smart Clock

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

BEDIENELEMENTE

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Manual SDs-01 D 3.2.2003 17:45 Uhr Seite 3

CONTROL ELEMENTS AND TERMINALS

MC-3+ SMART CLOCK Front Panel

1 »POWER«

This red LED lights up when the unit is switched on with the rear panel

POWER switch.

2 »MENU«

Use this key to access the different functional menus.

3 »SELECT«

Use this key to select a function within a specific functional menu.

4 »MODE«

This function menu allows to select the clock references for internal and

external synchronization as well as the reference for asynchronous digital

audio re-clocking. All three LED rows act in functional dependence.

5 »REFERENCE

INTERNAL + 10.0M«

This function menu allows to select the clock references for internal or

external synchronization and the reference for synchronous and asynchro-

nous digital audio re-clocking.

6 »CLOCK

MULTIPLIERS«

This function menu lets you determine the factor by which the basis clock

rate is multiplied additionally. Settings can be made individually for every

pair of Word Clock outputs (»1-3«) as well as for the AES3 (»5«) and S/P-DIF

(»4«) outputs.

7 »STATUS«

This menu indicates various signal status of the incoming reference clock or

digital audio signal.

8 »CLOCK

IN«

This menu indicates the clock rates of the incoming reference clock or

digital audio signal.

MC-3+ Smart Clock Rear Panel

Refer to the OPERATIONS chapter for more

information.

For detailed specifications of all terminals,

please refer to the »Pin Assignment of the

Connectors« and »Technical Data« sections

in the APPENDIX chapter.

7532 61

1 »WC LK OUT 1 – 3«

These 3 pairs of Word Clock outputs transfer all standard Word Clock rates

and Word Clock x 256 for older digidesign ProTools™ systems. Their number-

ing is aligned to the corresponding functional menus on the front panel. The

individual BNC connectors are pairwise marked as »A« and »B«, which allows

for, e.g. simple documentation of the connected devices. The impedances of all

connectors are 75 Ω (BNC connectors, female).