Technical data

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

B E D I E N E L E M E N T E

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

Manual SDs-01 D 3.2.2003 17:45 Uhr Seite 3

GENERAL OPERATION

Selecting Function Menus and setting Functions

The device is fully operated using the two toggle switches at the front

panel.

1 Switching the MENU key toggles between different basic function menus.

2 Switching the SELECT key activtes individual functions within one

function menu.

Steps of Operation

1 First press on MENU or SELECT key enables the last selected function

within the last selected function menu. The corresponding LED is

beginning to flash.

2 Every press on SELECT key will select a new function within a menu. The

LED of every selected function will flash accordingly and the

corresponding function is vailable at once.

3 When the needed function is selected, do not press the switches again!

After a period of approx. 4 seconds the LED in front of the selected

function will stop flashing.

The STATUS area is not accessible by using the MENU and SELECT switches,

because it only informs about different conditions of incoming signals.

Function Areas + Functions

Menus

Functions

For safety reasons, be sure to read

the SAFETY INSTRUCTIONS and

INSTALLATION chapters before first

powering-up!

We also recommend reading the CONTROL

ELEMENTS AND TERMINALS chapter for

information on how to connect MC-4!

All user-specific function settings

are available furthermore when

power is restored.

2. SELECT

selects individual

functions within

one function area.

1. MENU

selects individual

function menus.

MENU + SELECT operation