Manual

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

BEDIENELEMENTE

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Manual SDs-01 D 3.2.2003 17:45 Uhr Seite 3

CONTROL ELEMENTS AND TERMINALS

MC-4 Front Panel

1 POWER

This red LED lights up when the unit is switched on with the rear panel

POWER switch.

2 MENU

This key selects one of the available function menus.

3 SELECT

Use this key to select a function within a specific function menu.

4 MODE

This function menu allows to select all available conversion modes.

5 AUDIO

This function menu allows to select the digital audio formats which should

be converted with the previously selected conversion mode.

6 REFERENCE

This function menu allows to select the master clock reference for synchro-

nization of the selected format conversion mode as well as the SRCs.

7 STATUS

This menu indicates various signal statuses of the incoming master clock

reference signal and the digital audio signal as well as the SMUX coding of

the ADAT

output signal.

8 CLOCK

This menu indicates the clock rates of the incoming digital audio signal or

of the master clock reference signal.

MC-4 Rear Panel

1 AES11 REF IN

This input receives a balanced digital AES11 blank frame signal in com-

pliance with AES11–1997/2003 as master clock reference for the SRCs.

Alternatively, an AES3 digital audio signal in compliance with AES3 –1992

(R1997) or a S/P-DIF digital audio signal aligned to IEC60958 can be input.

The input impedance is 110 Ω (XLR connector, female).

Refer to the chapter »OPERATIONS« for

more information.

For detailed specifications on all terminals,

refer to the »Pin Assignment of the

Connectors« and »Technical Data« in the

chapter »APPENDIX«.

321

2 4 6

6 7 8

3 5