Technical data


!
!
!



16
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
This setting allows to convert an AES3 source signal (see under »AUDIO IN «,
»AES3«) unidirectionally (see under »MODE«, »UNI-DIR«) into AES3id,
S/P-DIF optical + coaxial and AES3 simultaneously. The sampling rate will be
displayed in the »REF CLOCK
IN « menu. The incoming AES3 signal will be re-
clocked and transfered to the format-same AES3 output. Thus, the original
input signal is not lost and available for further use!
Under »REFERENCE« the »AES3« option is selected automatically. Please see
the grey box on the left hand side for more information.
Unidirectional Format Conversion from:
AES3id to AES3, S/P-DIF optical + coaxial, AES3id
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK
Why a Clock Reference for
unidirectional Conversion
without SRC?
To allow for e.g. the AES3 format conver-
sion without SRC into AES3id and S/P-DIF,
the MC-6 needs to derive a valid clock signal
from the incoming audio source. Therefore,
the corresponding reference option is acti
-
vated in the »REFERENCE« menu automati-
cally. This selection can not be changed.
!
Unidirectional Format Conversion from:
AES3 to AES3id, S/P-DIF optical + coaxial, AES3
This setting allows to convert an AES3id source signal (see under »AUDIO IN «,
»AES3id«) unidirectionally (see under »MODE«, »UNI-DIR«) into AES3,
S/P-DIF optical + coaxial and AES3id simultaneously. The sampling rate will
be displayed in the »REF CLOCK
IN « menu. The incoming AES3id signal will
be re-clocked and transfered to the format-same AES3id output. Thus, the
original input signal is not lost and available for further use!
Under »REFERENCE« the »AES3id« option is selected automatically. Please
see the grey box on the left hand side for more information.
Unidirectional Format Conversion from:
S/P-DIF optical to AES3, AES3id, S/P-DIF coaxial + optical
This setting allows to convert an S/P-DIF optical source signal (see under
»AUDIO
IN «, »S/P-DIF op«) unidirectionally (see under »MODE«, »UNI-DIR«)
into AES3, AES3id, S/P-DIF coaxial and S/P-DIF optical simultaneously. The
sampling rate will be displayed in the »REF CLOCK
IN « menu. The incoming
S/P-DIF optical signal will be re-clocked and transfered to the format-same
S/P-DIF optical output. Thus, the original input signal is not lost and availab-
le for further use!
Under »REFERENCE« the »S/P-DIF op« option is selected automatically. Ple-
ase see the grey box on the left hand side for more information.
AES3
S/P-DIF op
AES3id
S/P-DIF co
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co