Technical data








18
Unidirectional Format with Sampling Rate Conversion from:
AES3id to AES3, S/P-DIF optical + coaxial, AES3id
This setting allows to convert an AES3id source signal (see under »AUDIO IN«,
»AES3id«) unidirectionally (see under »MODE«, »UNI-DIR«) into AES3,
S/P-DIF optical + coaxial and AES3id simultaneously. Its clock rate is changed
at the same time to this one of the reference signal‘s clock rate. The selec-
tion of the reference clock signal is the same as described on page 17.
Unidirectional Format with Sampling Rate Conversion from:
S/P-DIF optical to AES3, AES3id, S/P-DIF coaxial + optical
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting allows to convert an S/P-DIF optical source signal (see under
»AUDIO
IN «, »S/P-DIF op«) unidirectionally (see under »MODE«, »UNI-DIR«)
into AES3, AES3id, S/P-DIF coaxial and S/P-DIF optical simultaneously. Its
clock rate is changed at the same time to this one of the reference signal‘s
clock rate. The selection of the reference clock signal is the same as descri-
bed on page 17.
Unidirectional Format with Sampling Rate Conversion from:
S/P-DIF coaxial to AES3, AES3id, S/P-DIF optical + coaxial
This setting allows to convert an S/P-DIF coaxial source signal (see under
»AUDIO
IN «, »S/P-DIF co«) unidirectionally (see under »MODE«, »UNI-DIR«)
into AES3, AES3id, S/P-DIF optical and S/P-DIF coaxial simultaneously. Its
clock rate is changed at the same time to this one of the reference signal‘s
clock rate. The selection of the reference clock signal is the same as des-
cribed on page 17.