Technical data








20
Bidirectional Format Conversion between
AES3id and S/P-DIF optical
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting allows to receive an AES3id signal and a S/P-DIF optical signal
simultaneously for bidirectional format conversion. The procedure is the
same as described above. The sampling rates of the incoming audio signals
are displayed in the »REF CLOCK
IN « menus.
Bidirectional Format Conversion between
AES3id and S/P-DIF coaxial
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting allows to receive an AES3id signal and a S/P-DIF coaxial signal
simultaneously for bidirectional format conversion. The procedure is the
same as described above. The sampling rates of the incoming audio signals
are displayed in the »REF CLOCK
IN « menus.
Bidirectional Format Conversion between
S/P-DIF optical and S/P-DIF coaxial
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting allows to receive an S/P-DIF optical and a S/P-DIF coaxial signal
simultaneously for bidirectional format conversion. The procedure is the
same as described above. The sampling rates of the incoming audio signals
are displayed in the »REF CLOCK
IN « menus.
Bidirectional Format and Sampling Rate Conversion between
AES3 and AES3id
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting allows to receive an AES3 signal and an AES3id signal simulta-
neously. The bidirectional format conversion procedure is the same as de-
scribed above, but the clock rate displayed under »REF CLOCK
IN « is related
to this one of the selected reference clock signal.
The AES3 and AES3id input signal can consist of complete different sampling
rates, but their corresponding outputs are of same sampling rate. This is pos-
sible by adding a SRC process on the input channels to the standard format