Technical data








21
conversion. The sampling rate of the outputs now depends on the clock rate
of the reference clock signal, which is selected in the »REFERENCE« menu. The
example on page 20 shows Word Clock (WCLK) selected as clock reference.
In this mode, the following clock references are available for synchronization
of the internal SRCs:
WCLK, 25.0kHz – 200.0kHz, SCLK 11.2896MHz + 12.288MHz
AES11, 25.0kHz – 200.0kHz (through separate input at the rear)
Inputs of AES3, AES3id, S/P-DIF op, S/P-DIF co, each 25.0kHz – 200.0kHz
32.0kHz –192.0kHz, internal clock oscillator
To activate a clock source enter the »REFERENCE« menu and press the »SELECT«
button repeatedly. When the external clock reference signal can be locked by
the internal PLL circuit, the blue LED »LOCK
1
« in the STATUS menu will light
constantly. The clock rate of the selected clock source is displayed in the »REF
CLOCK IN« menu under »1«.
Bidirectional Format and Sampling Rate Conversion between
AES3 and S/P-DIF optical
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting allows to receive an AES3 signal and a S/P-DIF optical signal
simultaneously for bidirectional fomat and sampling rate conversion. The
procedure is the same as described above. The clock rate of the selected
clock reference signal is displayed in the »REF CLOCK
IN « menu under »1«.
Bidirectional Format and Sampling Rate Conversion between
AES3 and S/P-DIF coaxial
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting allows to receive an AES3 signal and a S/P-DIF coaxial signal
simultaneously for bidirectional fomat and sampling rate conversion. The
procedure is the same as described above. The clock rate of the selected
clock reference signal is displayed in the »REF CLOCK
IN « menu under »1«.
Bidirectional Format and Sampling Rate Conversion between
AES3id and S/P-DIF optical
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting allows to receive an AES3id signal and a S/P-DIF optical signal
simultaneously for bidirectional fomat and sampling rate conversion. The
procedure is the same as described above. The clock rate of the selected
clock reference signal is displayed in the »REF CLOCK
IN « menu under »1«.