Technical data








Bi-directional Format and Sampling Rate Conversion between
AES3id and S/P-DIF coaxial
22
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting allows to receive an AES3id signal and a S/P-DIF coaxial signal
simultaneously for bidirectional fomat and sampling rate conversion. The
procedure is the same as described above. The clock rate of the selected
clock reference signal is displayed in the »REF CLOCK
IN « menu under »1«.
Bi-directional Format and Sampling Rate Conversion between
S/P-DIF optical and S/P-DIF coaxial
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting allows to receive an S/P-DIF optical and a S/P-DIF coaxial signal
simultaneously for bidirectional fomat and sampling rate conversion. The
procedure is the same as described above. The clock rate of the selected
clock reference signal is displayed in the »REF CLOCK
IN « menu under »1«.
X-SRC Mode between
AES3 and AES3id
X-SRC
BI-DIR
UNI-DIR AES3
S/P-DIF op SRC
REFERENCE
88.2
48.0
44.1
32.0
192.0
96.0
176.4
MODE
AES3id
S/P-DIF co
AUDIO
IN
AES11
WCLK AES3
S/P-DIF op
AES3id
S/P-DIF co
This setting is a very special and of course unique function of your MC-6!
The function allows to convert two digital audio signals at the same time,
whereas both conversion streams may consist of different sampling rates.
On this occasion, the MC-6 extracts the clock out of the two incoming digital
audio signals and uses these as clock references to synchronize the SRCs in
front of each of the format-same outputs. This is especially useful when
interconnecting two unsynchronized digital audio devices, each running on
its own internal clock base.
A standard application is the interconnection of a digital mixing desk and a
digital multichannel effects processor. Please see the sketch on the following
page 23 to get an overview.