Instruction Manual

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

B E D I E N E L E M E N T E

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

INTRODUCTION

Thank you for purchasing the MC-5,

SD/HD Video Routing Matrix and

Distributor, from MUTEC GmbH.

Please keep this manual for future reference!

General Function Description

The MC-5 is an extremely high-flexible routing matrix and distributor for

standard definition (SD) bi-level and high definition (HD) tri-level video

signals.

The unit offers simultaneous routing and distribution of SD and HD video

signals, regardless of the frame rates and formats of the incoming video

references. In this process, the input signals are distributed according to

your settings directly to the selected outputs without any alteration or

amplification.

For this, the MC-5 provides 4 BNC inputs which can be routed individually

to12 BNC outputs. One input reference signal can be distributed to one, but

also on up to 12 outputs. When inputing more signals the available number

of outputs will be reduced accordingly. But due to the routing capabilities

of MC-5, the number of the outputs for the individual input signals can be

assigned free.

Additionally, the unit offers a preset management which allows to store

and to switch over 4 different settings of all outputs. So, MC-5 enables to

configure the exact needed number of outputs for every video distribution

application very easily.

A new designed, simple user interface enables to install the MC-5 without

longer training time. Thus, the MC-5 provides an ideal output expansion for

MUTEC’s video clock generator products, e.g. iCLOCK, iCLOCKdp, MC-3.1,

MC-3.2 and MC-3.3.

Boxes which contain a triangle with

an exclamation mark inside should

be read carefully!

These include

additional information which are of major

importance for the functional descriptions

in the text column.

The grey boxes contain supplementary

informationen for the corresponding

sections in the text columns. The content of

the individual box refers to the description

in the text column beside the box.