System information
Adjusting the assignable effects trim level
1.
Deselect the Automation Settings button .
2. Click the label on the multipurpose slider and choose an assignable effects chain from the menu.
3. Drag the FX fader to control the level of the track sent to each of the assignable FX chains that you
have created. Dragging the fader to the left cuts the volume; dragging to the right boosts the
volume.
You can hold Ctrl while dragging a fader to adjust the setting in finer increments, or double-click the
fader to return it to 0 dB.
If multiple tracks are selected, all selected tracks are adjusted.
Adjusting the assignable effects automation level
When you select the Automation Settings button , the fader thumb is displayed as a , and you can
use the control to edit assignable effects send level automation. For more information, see "Audio Track
Automation" on page 255.
Adjusting a bus send level
The multipurpose slider in the track header can function as a trim control that adjusts the overall bus send
level of the track, or it can adjust bus send automation settings.
The trim level is added to the bus send automation settings so your envelope is preserved, but with a boost
or cut applied. For example, setting the trim control to -3 dB has the same effect as decreasing every
envelope point by 3 dB.
238CHAPTER 10