System information
b. In the I/O control region of the input bus channel strip, click the Input Source button and
choose the sound card input you want to record:
c. Click the Output button in the I/O control region of the input bus channel strip and choose
Off. The bus output is left off so we can monitor the input through the track.
3. Set your track to record from your input bus:
a. Click the Record Input button, choose Input Busses from the menu, and choose your input
bus.
b. Click the Record Input button and choose Input Monitor Mode: On or Input Monitor Mode:
Auto so you can hear your input signal during recording.
n When Auto is selected, you will hear the input monitor signal when playback is
stopped and during recording. If you're recording into selected events, you'll hear the
input monitor signal only when the cursor passes over the selected events.
n When On is selected, the behavior is similar to Auto mode, but you will always
hear the input monitor during recording — monitoring is not toggled on and off
when recording into a selected event.
Your ability to monitor effects in real time is dependent on your computer's
performance. Effect automation envelopes are bypassed during record monitoring.
4. Position the cursor where you want to start recording.
MIXING AUDIO341