System information
b. Connect the output of your effects processor to an input on your sound card (for this
example, we'll use Inst 1).
2. Add a bus to your project. This bus will be used as a destination to send a track to your effects
processor.
For more information, see "Adding Audio Busses" on page 334.
3. Configure your bus to send its output to your effects processor:
In the I/O control region of the bus's channel strip, click the Output button and choose the output
that is connected to your effects processor's input (LineOut 1/LineOut 2 for this example).
This auxiliary bus provides a signal path to your effects processor's input.
4. Add an input bus to your project. This input bus will receive the signal from your effects processor.
For more information, see "Using Input Busses" on page 338.
5. Configure your input bus to take its input from the effects processor and send its output to your
main mix:
a. In the I/O control region of the input bus's channel strip, click the Input Source button and
choose the sound card input that is connected to your effects processor's output (Inst 1 for
this example).
MIXING AUDIO343