System information
If the Meters control region is not visible, peak meters are displayed in the Faders control region.
Right-click the meter and choose a setting from the shortcut menu (or hover over the meter and roll your
mouse wheel) to change the resolution and display options.
Right-click the peak meters and choose Show Peak Meter to show or hide meters for individual
channels.
Changing a track's automation mode
When the Faders control region is visible, each track displays controls you can use to adjust track panning,
volume and muting. The controls can adjust static (trim) or automation levels. Use the Automation
Settings button at the top of the Faders control region to choose the automation mode and turn
automation on or off.
To show or hide the Faders control region, click the Faders button in the View Controls pane.
To change a track's automation recording mode, click the down arrow next to the Automation Settings
button and choose a setting from the menu.
The track controls behave differently depending on the track's automation recording mode:
n
When the track automation mode is set to Off , the control adjusts the level of the entire track. In
this mode, the automation control acts as a second trim control.
n
When the track has a volume or pan envelope and the track automation mode is set to Read , the
control will follow the envelope during playback but cannot be adjusted.
360CHAPTER 15