System information

The Pre/Post Fader Send button allows you to create cue mixes that are not affected by the gain (or
mute/pan) stages of the bus or track. For more information, see "Creating a Cue (Headphone) Mix with the
Mixing Console" on page 382.
n
When Pre Fader Insert FX and Pre Fader Send are selected, your audio signal flows as follows:
bus effects — bus send — bus pan — bus volume.
n
When Pre Fader Insert FX and Post Fader Send are selected, your audio signal flows as follows:
bus effects — bus pan — bus volume — bus send.
n
When Post Fader Insert FX and Pre Fader Send are selected, your audio signal flows as follows:
bus send — bus pan — bus volume — bus effects.
n
When Post Fader Insert FX and Post Fader Send are selected, your audio signal flows as
follows: bus pan — bus volume — bus effects — bus send.
Input Bus Channel Strips
A separate channel strip is displayed for each input bus in your project.
To show or hide channel strips for busses, click the Busses button in the View Controls pane. For more
information, see "The View Controls Pane" on page 351.
Changing a bus's name
To rename an input bus, double-click the label at the bottom of the channel strip and type a new name in
the box (or press F2 to rename the selected bus). The channel strip in the Mixing Console is updated when
you press Enter.
Adding or editing input bus (insert) effects
When the Insert FX control region is visible, each input bus displays its effects chain at the top of the
channel strip.
To show or hide the Insert FX control region, click the Insert FX button in the View Controls pane.
THE MIXING CONSOLE369