System information
3. Double-click your Mackie Control in the Active control devices list to display the Configure Mackie
Control dialog.
The current channel mapping is displayed on each device's LCD.
4. Choose the channels you want to control with the Mackie Control Universal:
a. From the Device Type drop-down list, choose Mackie Control.
b. From the Channel Mapping drop-down list, choose the channels you want to adjust with the
Mackie Control Universal.
5. Choose the channels you want to control with the Mackie Control Extender:
a. From the Device Type drop-down list, choose Mackie Control Extender.
b. From the Channel Mapping drop-down list, choose the channels you want to adjust with the
Mackie Control Extender.
6. Repeat Step 5 for each Mackie Control Extender.
7. Click OK to apply your changes and close the Configure Mackie Control dialog.
8. Click OK to apply your changes and close the Preferences dialog.
Configuring or customizing control mappings
Use the External Control & Automation tab in the Preferences dialog to select the control surfaces you want
to use and adjust their configuration. For more information, see "Preferences - External Control &
Automation Tab" on page 611.
When you customize your control mappings, button functions may not match the labels on the
overlay. You can click the Default All button in the Configure Mackie Control dialog to restore the
default settings.
1. From the Options menu, choose Preferences to display the Preferences dialog.
2. Select the External Control & Automation tab.
3. Double-click your Mackie Control in the Active control devices list to display the Configure Mackie
Control dialog.
4. To add or change a function do the following:
a. Select an item in the User defined surface control mappings list.
b. Select an item in the Available host functions list.
c. Click the Assign button.
5. To remove a function, select an item in the User defined surface control mappings list and click the
Clear button.
6. To remove all functions, click the Clear All button.
7. To replace all custom functions with the default settings, click the Default All button.
532CHAPTER 30